Project Tamama

Day 11 - Stop!!!.....

.... its hammer time!! *cough*

Sorry couldn't resist!

Anyway another busy day on day 11, lots left to do, the plan was to get fitted the front hubs/brakes/drive shafts, and re-fitting the front subframe with steering rack ,and the 24mm front a/r bar, and fitting the shift linkage and anything else i could get done!

So i made a start - my parents came over to help so me and my dad got started on lifting the heavy crossmember back into place - which we just managed, and bolted up.
Meaning that now the engine is fully bolted into place at all five mounts, next i got working on fitting the Antiroll/sway bar, while my dad got starte don preping the drive shafts to go in.

Meanwhile my mate chris came over, bringing back with him the freshly painting up door handles and mirrors - and what a damn fine job hes done on them as well :D



I like them muchos :D

So we where all pritty busy on our own sections as you can see (ok ok i took 5 mins off to take some pictures :P )





Then came fitting the drive shafts and hooking up the front hubs etc - and it all went rather smoothly and the end result:



NSX calipers, 282 Black diamond 20 grove disks with AEM fast road pads - oh yes pls :D

Mean while chris was making a start on the interior and got it ready to this stage:







Now its all ready to drop the dash and seats in today, day 12 - as well as sorting the brake fluid and clutch out. Sorry for the half hearted post today but ive gotta be fast as im off into town and then to make a start!

Thanks for reading!

Chris_Gee

posted by Chris_Gee @ 8:49 AM